is an economic co-polymer cork material that is good for sealing oil and fuel.
Construction
| 09-DR101 Roll Thickness |
1/32″ | 3/64″ | 1/16″ | 3/32″ | 1/8″ | 5/32″ | 3/16″ | 1/4″ | ||
| 09-N101 Sheet Thickness |
1/32″ | 3/64″ | 1/16″ | 3/32″ | 1/8″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
* Rolls are available in 42″ wide
* Sheets are available in 36″ x 36″
Application
Low bolting pressure oil resistant seals.
| Test Method | Property | Result |
|---|---|---|
| ASTM D2000 | Binder | Co-Polymer |
| ASTM D3676 | Density | 33 pcf, minimum (529 g/L, min.) |
| ASTM F152 | Tensile Strength | 125 psi, min. (0.86 MPa) |
| ASTM F36 | Compression @ 400 psi | 40-55% |
| ASTM F36 | Recovery | 75%, min |
| ASTM F147 | Flexibility | 3 max |
| ASTM D2240 | Shore A Hardness | 45-65 |
| ASTM F146 | Fluid Immersion | Volume Change |
| Oil 1 (70 hrs 212°F) | -10 to +15% | |
| Oil 3 (70 hrs 212°F) | +5 to +50% | |
| Fuel A (72°F for 22 hrs.) | 0 to +35% | |
| ASTM D395 | Compression Set B | |
| (25% deflection, 22 hrs. 158°F) | 55% max. | |
| Temperature Range: | - 40 to 250°F (- 40 to 121°C) | |
| Meets Specifications: | ASTM F104 F228900M1 MIL-G-12803C P2255B |
|
| This material has a shelf life of 5 years from date of manufacture when protected from enviromental extremes | ||
